Yaesu FT-450 Operation Manual

Also see for FT-450: Brochure & specs Reference Manual User manual Technical supplement

Page 69FT-450 OPERATION MANUALBEEPER S ETTINGBeep VolumeYou may adjust the beep volume level via the Menu Item “BEEPVOL”.1. Press and hold the [F] button for one second toenter the Menu mode. The “ ” icon will ap-pear on the display.2. Rotate the [DSP/SEL] knob to select the menuitem “BEEPVOL”.3. Press the [DSP/SEL] knob to enable adjustmentof this menu item. The “ ” icon will be blink-ing.4. Rotate the [DSP/SEL] knob to set the desired beepvolume level (FIX 0 - FIX 100).WARNING! Do not adjust the beep volume toohigh. You may press the [METER/DIM] button tosound a beep as you adjust the [DSP/SEL] knob.If you wish to adjust the beep volume level in ac-cordance with the [AF GAIN] knob, press the [F]key to change the display to “LNK-XX” then rotatethe [DSP/SEL] knob to set the volume ratio of thebeep volume level for the receiving audio volumelevel. Available selections are “LNK-50” ~ “LNK 0”~ “LNK+50”. When the “LNK 0” is selected, thebeep volume level is the same as receiving audiovolume level.You may press the [HOME/RCL] button to resetthe beep volume level to the factory default.5. Press the [DSP/SEL] knob. The “ ” icon re-turns to appear continuously.6. Press and hold the [F] button for one second tosave the new setting and return to normal opera-tion.MISCELLANEOUS S ETTINGS[HOME/RCL] button[F] button[DSP/SEL] knob[METER/DIM] button