Yaesu FT-70DR Operating Manual

Also see for FT-70DE: Operating manual Advance manual Operating manual Manual Instruction manual

Contents

Yaesu FT-70DR Operating Manual Manual pdf 16 page image

14FT-70DR/FT-70DE Operating ManualOperationTurning the Transceiver ON1. Press and hold the Power (Lock) switch toturn the transceiver ON.● Turning the transceiver OFFPress and hold the Power (Lock) switch againto turn the transceiver OFF.● Inputting the call signThe first time the transceiver is turned ON af-ter it is purchased; input your own call sign.z Inputting charactersInput the callsign with the ten key or DIAL knob.• Rotate the DIAL knob to select any of the 38available characters:.···  0 – 9  A – Z  (space)  -* /* ···* The ” - ” and ” / ” may not be input for the firstcallsign character.• Press the keys repeatedly to toggle among thefour available characters associated with thatkey. For example: pressing the [2] repeatedlywill toggle through A → B → C → 2 → A ···z Moving the cursor and deleting the input characters:[BAND] ׃key Moves the cursor to the right[MODE] ׃key Moves the cursor to the left[GM] ׃key Press and hold to erase all characters after the cursorz Saving the inputted call sign:Press the [F] key or the PTT switchz The Call Sign ID can be changed using set mode item [64 MYCALL] ( 37).Up to 10 characters can be entered.z Characters that may be inputted for the call sign are the numbers 0-9, letters ”A – Z” in uppercase, the hyphen and the slash.Adjusting the Volume Level1. While pressing and holding the VOL knob, rotate the DIAL knob to adjust the volumeto a comfortable level.