Yaesu FT-70DR Operating Manual

Also see for FT-70DE: Operating manual Advance manual Operating manual Manual Instruction manual

Contents

Yaesu FT-70DR Operating Manual Manual pdf 38 page image

36FT-70DR/FT-70DE Operating ManualTables of Set Mode OperationsNo. Set Mode item Description Selectable options(Options in bold are the default settings)1 ANT.ATT Switch the attenuator between ON/OFF. OFF / ON2 APO Set the length of time until the transceiverturns off automatically. OFF / 0.5 Hours to 12 Hours3 BCLO Turns the busy channel lockout function on/off. OFF / ON4 BEEP Sets the beep sound function. OFF / KEY+SC / KEY5 BEP.LVL Beep volume setting LEVEL1 – LEVEL4 – LEVEL76 BEP.EDG Sets the beep sound ON or OFF when aband edge is encountered. OFF / ON7 BEP.STBSets the beep sound ON or OFF when theother station completes transmission in theDigital Mode.OFF / ON8 BELL Set the bell function settings. OFF / 1 T–20 T / CONT (Continuous ringing)9 BNK.NAM Assign a name to each memory bank. (up to 6 characters)10 BSY.LED Turn the MODE/STATUS Indicator ON orOFF while receiving signals. LED.OFF / LED.ON11 CLK.SFT Set the clock shift function. A / B12 DC VLT Display the voltage. (Voltage)13 DCS.INV Select a combination of DCS inversioncodes in terms of communication direction.RXN.TXN / RXR.TXN / RXB.TXN / RXN.TXR / RXR.TXR / RXB.TXR14 DIMMER Set the brightness level of the LCDbacklight and numeric keypad light. LEVEL1 – LEVEL615 DIG.POP Set the POP UP display time. OFF / 2 SEC – 10 SEC – 60 SEC / CONT16 DIG VW Turn the VW mode selection ON or OFF. ON/OFF17 DP-ID DP-ID list (Display/Register/Clear) (Registered DP-ID)18 DT DLY Set the DTMF code transmission delay time. 50MS / 250MS / 450MS / 750MS / 1000MS19 DT SET Select and edit the DTMF auto dialer mem-ory channel. CH0 / CH1 – CH920 DT SPD Set the DTMF code transmission speed. 50 MS / 100 MS21 DW INT Set the priority memory channel monitoringinterval during Dual Receive. 0.1 S – 5.0 S – 10.0 S22 DW RSM Configure the scan stop mode settings forDual Receive. 2.0 S – 10.0 S / BUSY / HOLD23 DW RVT Turn the “Priority Channel Revert” featureON or OFF during Dual Receive. OFF / ON24 GM RNG Select the beep option while receiving digi-tal GM information. OFF / IN RNG /ALWAYS25 GM INT Set the transmission interval of digital GMinformation. OFF / NORMAL / LONG26 HM/RV Select the function of the [HOME/REV] key. HOME / REV27 HM-VFO Turn transfer VFO to the Home channel ONor OFF. OFF / ON28 LAMP Set the duration time of the backlight andkeys to be lit. OFF / 2 SEC – 5 SEC – 10 SEC / CONT29 LED.LGT Turn ON the LED light. (LED lights up)30 LOCK Configure the lock mode setting. KEY / DIAL / K+D / PTT / K+P / D+P / ALL