Yaesu FT-70DR Operating Manual

Also see for FT-70DE: Operating manual Advance manual Operating manual Manual Instruction manual

Contents

Yaesu FT-70DR Operating Manual Manual pdf 20 page image

18FT-70DR/FT-70DE Operating ManualChanging the Transmission Power Level1. Press the [F] key, then press the [1](TX PO) key.2. Rotate the DIAL knob to select one of the follow-ing transmission power levels.TX PO Level Icon PO meterHIGH (5 W)* (off)MID (2 W)LOW (0.5 W)*The default setting.3. Press the PTT switch to save the setting and return to the normal operation.The transmission power level may be set separately for each frequency band.Locking Keys and DIAL knob1. Press the [POWER] (LOCK) switch, “LOCK”is displayed on the LCD for one second, the“ ” icon appears on the LCD, and then thekeys and DIAL knob are locked.z The keys, the DIAL knob, and the PTT switch may be selected to be locked using Set Mode[30 LOCK] ( 36).The default setting is the [K+D] (the keys and the DIAL knob are locked).z The [MONI/T-CALL] switch and the VOL switch cannot be locked.2. Press the [POWER] (LOCK) switch again, “UNLOCK” will be displayed on the LCDand keys and the DIAL knob are unlocked.Programmable key functionThe [7] (P1) and or the [8] (P2) keys are user programmable, allowing quick access tothe Set Modes that are used most often.● Assigning Set Mode Items to the Programmable Keys1. Press and hold the [F] key, and then rotate the DIAL knob to select the desired SetMode item.2. Press and hold the [7](P1) key or the [8](P2) key.“P1KEY” or “P2KEY” appears on the LCD and return to the Set Mode.3. Press the PTT switch to return to the normal operation.● Recalling the assigned Set Mode item1. Press the [F] key and then press the [7](P1) key or [8](P2) key.The assigned Set Mode item appears on the LCD.The [7] (P1) is [12 DC VLT] ( 36) and [8] (P2) key is [47 RX MOD] ( 37) as a defaultassignment.