24FT-70DR/FT-70DE Operating ManualUsing the MemoryThe FT-70DR/DE transceiver incorporates Large-capacity memory channels that can reg-ister the operating frequency, communication mode, and other operational information.• 900 Memory Channels• 90 Skip Search Memory Channels• 6 Home Channels• 50 pairs PMS Memory ChannelsEach memory channel can store the following information.• Operating frequency • Communication mode • Frequency steps• TX output power • Memory tag • Repeater information• Tone information • DCS information • ATT information• S-Meter squelch level • Skip memory information • Specified memory channelinformationMemory channels can be sorted and registered into memory banks according to the de-sired use. The transceiver allows using 24 different memory banks. A maximum of 100memory channels can be registered in each memory bank. One memory channelcan be registered to several memory banks. One memory channel in one memory bankcan be recalled, and the memory channels in the several memory banks can be scanned.9008994321L50/U50L49/U49L4/U4L3/U3L2/U2L1/U1904903902901999998Memory Channel Configuration of the TransceiverMemory channels900 channelsHome channels(6 channels)Up to 100 memory channels can beregistered to each bank.(One memory channel can be registeredto several memory banksSkip search memory channels(99 channels)PMS memory channels(50 sets)For additional details on the Skip Search Memory, PMS memory channel and Memory Bank,refer to the Advanced Manual which may be downloaded from the Yaesu website.CAUTIONS!The information registered to memory channels can be corrupted by incorrect operation, staticelectricity, or electrical noise. Also, it can be erased in the event of a failure or repair. Be sure tokeep a record of the settings on paper.