Yaesu FT-7900R Operating Manual

Also see for FT-7900R: Technical supplement

35FT-7900R OPERATING MANUALMemory Recall1. While operating in the VFO mode, press the [V/M(MW)]key momentarily to enter the Memory mode.2. Rotate the DIAL knob to select the desired channel. Ifyou press the [MHz(PRI)] key momentarily, then rotate the DIAL knob, you’ll be able toscroll through the memory channels at a rate of 10 channels per click of the DIAL.3. When selecting a memory channel that has an alpha-numeric “Tag” (label) appended,press the microphone’s [B] key momentarily to switchthe Memory Channel display between the “Frequency”format and “Alpha-numeric Tag” format.4. To return to the VFO mode, press the [V/M(MW)] key momentarily again.When the radio is already set to the Memory mode, an easy way to recall memories is toenter the microphone’s key in the memory channel number. For example, to recall memorychannel #4, press [0] Æ [0] Æ [4].Memory Offset TuningOnce you have recalled a particular memory channel, you may easily tune off that channel,as though you were in the “VFO” mode.1. With the FT-7900R in the “MR” (Memory Recall) mode, select the desired memorychannel.2. Now press the [BAND(SET)] key momentarily; the“ ” icon will appear on the display.3. Rotate the DIAL knob, as desired, to tune to a new fre-quency. The synthesizer steps selected for VFO operation on the current band will be thesteps used during Memory Tuning.4. If you press and hold in the [SCAN(SEL)] key for 1/2 second during Memory Tuning,the data will now have been copied to VFO, although the original memory contents willremain intact on the previously-stored channel.5. If you wish to return to the original memory frequency, press the [BAND(SET)] keymomentarily. The “ ” icon will disappear.M EMORY O PERATIONREGULAR MEMORY CHANNEL OPERATION