Page 103FT-991 O PERA T I N G M A N U A LStAndArd MeMory operAtionSplit MemorySeparate frequencies for transmit and receive can be registered for each memory channel.1. Set VFO-A up with the frequency, mode, and status,the way you want to have it stored.2. Press the A M button momentarily; the currentchannel number will appear in the display and the“MCK” notation will appear.AM ButtonMULTI Knob E J E J E J .5$3. Rotate the MULTI knob to select the memory chan-nel that you wish to store the data on.4. Press and hold in the AM button for one secondto store the receive frequency and other data into theselected memory channel. A double beep will con-firm that the AM button was held in long enoughand the data is registered.5. Enter the transmit frequency.6. Press the AM button. Make sure that the memorychannel storing the receive frequency is selected. E J E J E J (/.5$7. To register the transmit frequency, press and hold thePTT button on the microphone, and simultaneouslypress and hold the A M button. A double beepwill confirm that the AM button was held in longenough and the data is registered. When the memorywriting is completed, the receive frequency will beshown in the display.A dvice :When a split-frequency memory channel is recalled,“DUP” is displayed on the LCD.Displays DUPM eMorY operation