Yaesu FT-991 Operating Manual

Also see for FT-991: Manual Manual Operating manual Reference book Instruction manual

Contents

Page 132FT-991 O PERA T I N G M A N U A L081 RPT SHIFT 50MHzFunction: Sets the RPT offset frequency on the 50 MHzband.Available Values: 0 - 4000kHz (10kHz/step)Default Setting: 1000kHzDescription: Sets the repeater offset frequency on the 50MHz band.082 RPT SHIFT 144MHzFunction: Sets the RPT offset frequency on the 144MHz band.Available Values: 0 - 4000kHz (10kHz/step)Default Setting: 600kHzDescription: Sets the repeater offset frequency on the144 MHz band.083 RPT SHIFT 430MHzFunction: Sets the RPT offset frequency on the 430MHz band.Available Values: 0 - 10000kHz (10kHz/step)Default Setting: 5000kHzDescription: Sets the repeater offset frequency on the430 MHz band.084 ARS 144MHzFunction: Sets the ARS function on the 144 MHz band.Available Values: OFF/ONDefault Setting: ONDescription:OFF:Disables the ARS function.ON:Enables the ARS function.085 ARS 430MHzFunction: Sets the ARS function on the 430 MHz band.Available Values: OFF/ONDefault Setting: ONDescription:OFF:Disables the ARS function.ON:Enables the ARS function.086 DCS POLARITYFunction: Selects the DCS code polarity.Available Values: Tn-Rn/Tn-Riv/Tiv-Rn/Tiv-RivDefault Setting: Tn-RnDescription: When using the DCS function, the trans-ceiver can transmit/receive the DCS code with thephase reversed.Tn-Rn:Transmit (in phase), receive (in phase)Tn-Riv:Transmit (in phase), receive (reverse phase)Tiv-Rn:Transmit (reverse phase), receive (in phase)Tiv-Riv:Transmit (reverse phase), receive (reverse phase)087 RADIO IDFunction: Displays the unique transceiver ID assigned atthe time of shipment (5-digit alphanumeric charac-ters).Available Values: Cannot be changed.Default Setting: Differs depending on the transceiver.088 DIGITAL SQL TYPEFunction: Sets the squelch type in digital mode.Available Values: OFF/CODE/BREAKDefault Setting: OFFDescription: Selects the squelch type in digital mode.OFF:Outputs the audio whenever the transceiverreceives a digital signal from another YAESUtransceiver.CODE:The audio is output only when the SQL code ofthe received signal matches the setting.BREAK:With the BREAK setting on, the audio is output,whenever a signal is received from another sta-tion with the BREAK setting on, regardless ofthe code setting.089 DIGITAL SQL CODEFunction: Sets the squelch code for digital mode.Available Values: 000 - 126Default Setting: 000090 GM DISPLAYFunction: Sorts the group stations to be displayed whenusing the GM function.Available Values: DISTANCE/STRENGTHDefault Setting: DISTANCEDescription:DISTANCE:Active group member stations are displayed ac-cording to their distance from this station, begin-ning with the closest member station.STRENGTH:Active group member stations are displayed ac-cording to their signal strengths, beginning withthe strongest signal first.091 DISTANCEFunction: Sets the unit of measure to indicate the dis-tance between your station and communication sta-tions when using the GM function.Available Values: km/mileDefault Setting: mileM enu M oDe