RADIO SETTING- ENCDEC RTTY -RX USOSFunction: Enables/Disables the RX USOS fea-ture.Available Values: OFF / ONDefault Setting: ONDescription: When the space symbol is received,the RX USOS function that automati-cally switches to character reception(LTRS) is turned ON or OFF.TX USOSFunction: Enables/Disables the TX USOS fea-ture.Available Values: OFF / ONDefault Setting: ONDescription: When sending a number and a sym-bol following a space symbol, the TXUSOS function to forcibly insert theFIGS code is turned ON or OFF.RX NEW LINE CODEFunction: Selects the command code used forthe Carriage Return during RTTY re-ceive.Available Values: CR, LF, CR+LF / CR+LFDefault Setting: CR, LF, CR+LFDescription: Set the code to perform line feed forRTTY.CR, LF, CR+LF: Do a line break with all codes.CR+LF: Line feed is performed only forCR + LF code.TX AUTO CR+LFFunction: Enables/Disables the sending of theCarriage Return (CR+LF) Code whiletransmitting in RTTY.Available Values: OFF / ONDefault Setting: ONTX DIDDLEFunction: Selects the transmission code whenthere is not a character to be transmit-ted.Available Values: OFF / BLANK / LTRSDefault Setting: BLANKDescription: This code is sent when there are nocharacters sending.BLANK: If there is no character transmission, ablank code is transmitted.LTRS: When there are no characters transmit-ted, the letter code is transmitted.OFF: Does not send out the code.BAUDOT CODEFunction: Selects the Baudot Code used for theRTTY mode.Available Values: CCITT / USDefault Setting: US92
