49Sending and Receiving APRS Messages(2) Appending standard text1 Edit the call sign and text according to Steps1 to 6under “Creating and sending a new message” (P.46).2 Press [ ] or [ ] to move thecursor to the position at which you want to insert thestandard text.3 Press [ ].4 Turn the DIAL to display the text number of thestandard text you would like to use.5 Press .The standard text to the right of the cursor will becopied.Tip Any character string to the right of the cursor will beoverwritten.Replying to a received message1 Display the “MESSAGE LIST” screen.2 Select the message tag that you would like to replyto or display the message details.3 Press [ ].The screen for inputting the message and call signtime will be displayed.4 Turn the DIAL and select characters to enter thetext.Tip Numbers and symbols can be entered.Press [ ] → This switches between letters,numbers and symbols.Press [ ] → This deletes all characters to the right of the cursor.Press [ ] → This shifts the cursor to the left.Press [ ] → The cursor will shift to the right.Press [ ] → This deletes all characters to the left of the cursor.Please refer to “Input characters” ( P. 20) in the basic operating manual for details.5 Press for one second or longer.The message will be transmitted.The transmitted message will be displayed at the top of the list.