Yaesu FTM-100DR Instruction Manual

Also see for FTM-100DR: Instruction manual Instruction manual Operating manual Quick manual Operating manual

Contents

Yaesu FTM-100DR Instruction Manual Manual pdf 59 page image

58Using the APRS set-up menuFilter function settingsThe sets the filter for the downloading of various types of beacons.1 Press for one second or longer.The set-up menu will be displayed.2 Turn the DIAL, select [10 APRS], then press .The menu list will be displayed.3 Turn the DIAL, select [3 APRS FILTER], then press.The filter setting screen will be displayed.Ifitemdoes not appear on the display, turn the DIALto scroll the display.• Mic-E: Download and display the microphone encoder beacon.• POSITION: Download and display the position beacon and RAW NMEA data.• WEATHER: Download and display the meteorological station beacon.• OBJECT: Download and display the object beacon.• ITEM: Download and display the item beacon.• STATUS: Download and display the status beacon.• OTHER: Download and display the non-APRS packets• RANGE LIMIT: This restricts reception to beacons that lie within a specified rangefrom your own station. There will be no limit on the distance whenthis is set to OFF. The unit follows the setting under “2 DISTANCE”of “11 APRS UNITS”.• ALT.NET: Download and display the packets specified by the destination addressin alternate nets.4 Turn the DIAL and select [1 Mic-E].5 Press and selectON or OFF.Pressing turns this function ON and OFF.ON: Download the beacon.OFF: Do not download the beacon.6 Turn the DIAL to [2 POSITION], [3 WEATHER], [4 OBJECT], [5 ITEM], [6STATUS], or [7 OTHER] and select, then press to turn the function ON orOFF.Pressing turns this function ON and OFF.7 Turn the DIAL, select [8 RANGE LIMIT], then press.Move the cursor over the item for which you wouldlike to enter numbers.