Yaesu FTM-100DR Instruction Manual

Also see for FTM-100DR: Instruction manual Instruction manual Operating manual Quick manual Operating manual

Contents

Yaesu FTM-100DR Instruction Manual Manual pdf 72 page image

71Using the APRS set-up menu6 Press .The screen will return to the list of message groups and the registered group filterwill be displayed.7 Press for one second or longer.The group filter will be set and the display will return to the previous screen.Automatic response setting of received messagesA reply message set up beforehand can be automatically sent out upon receiving amessage.1 Press for one second or longer.The set-up menu will be displayed.2 Turn the DIAL, select [10 APRS], then press .The menu list will be displayed.3 Turn the DIAL, select [18 MESSAGE REPLY], thenpress .The automatic reply setting screen will be displayed.4 Turn the DIAL and select [1 REPLY].5 Press and select ON or OFF.Pressing turns this function ON and OFF.ON: A reply message is returned automatically whena message is received.OFF: A reply message is not returned when a message is received.Tip Factory shipping value: OFF6 Turn the DIAL, select [2 CALLSIGN], then press.The cursor will shift to the left of the call sign.Tip Please set this only when you want to reply to a specificstation. Please proceed to Step9if this is not required.7 Turnthe DIAL and select characters.Please register the call sign as follows.∗∗∗∗∗∗-NN∗: call sign (6 characters maximum)NN: SSID (a number between 1 and 15 or nil)Tip You can enter capital letters, numbers, and a certain symbol (only “∗” can be used).Press [ ] → This switches between letters, numbers, and ∗.Press [ ] → This deletes all characters to the right of the cursor..Press [ ] → The cursor will shift to the left.Press [ ] → The cursor will shift to the right.Press [ ] → This deletes all characters to the left of the cursor.Please refer to “Input characters” ( P. 20) in the basic operating manual for details.