30Using MemoryUsing MemoryWide variety of Memory FunctionsFTM-400DR provides the following various types of memory channels in addition to theregular memory channels (500 channels each for both A and B band.• [Skip Search Memory] that allow you to skip unwanted frequencies during VFOscanning.• 9 sets of [memory channels for Programmable Memory Scanning (PMS)]respectively for both A band and B band.An operating frequency, operation mode (type of radio), and other operationalinformation can be stored for each regular memory channel, or PMS memory channel.• Operating frequency • Operation mode • Memory tag• Repeater information • Tone information • DCS information• Antenna squelch information • Memory skip information • Transmission OutputRegistering to MemoryPrecautionContent stored in memory can be erased due to incorrect operation, static electricity, or electricalnoise. Memory content can also be erased during malfunction or repair. Content that is stored inmemory should be written on paper or backed up on a microSD memory card.The FTM-400DR allows you to use 500 memory channels respectively for both A bandand B band.1 Switch to VFO mode.2 Select frequency with O.Select the frequency to register to the memory.3 Press and hold F over 1 second.The register to memory screen appears.4 Tap [MW].The character entry screen appears.Reference Memory can also be named (See page 000).5 Tap [ENT].The memory write operation is completed, and theregistered frequency appears on screen.Reference Tap [Cancel] to cancel registering to memory.Reference• 145.000MHz is registered to memory channel 1 in factory settings. Although this frequency can bechanged, it cannot be erased.• The frequency which has previously been registered to a memory channel can be overwritten with anew frequency.When you intend to register a new frequency into the memory, an unregistered memory channel isdisplayed.
