31Using MemoryWide variety of Memory FunctionsSplit MemoryTwo different frequencies, one for reception and other for transmission can be registeredto a memory channel.1 Register reception frequency to the memory.Reference Refer to the [Registering to Memory] above, forregistering frequency.2 Select transmission frequency in VFO mode.3 Press F for longer than a second.The register to memory screen appears.4 Tap [Reception Frequency].Select the reception frequency to spcify from thememory list.5 Tap [TX IN].The character entry screen appears.Reference The radio frequency can also be named (See page 000).6 Tap [ENT].Registration to memory completes and the frequency appears on screen.When you recall the memory channel of which you registered two differentfrequencies, one for reception and the other for transmission, the @ icon appearson screen.Recalling a Memory ChannelRecall a registered memory channel in the following procedure:1 Tap [V/M].The Memory mode is selected, and the memorychannel you used last appears on screen.2 Select a memory channel with O.Select the memory channel to use.Remark • Pressing and holding O over 1 second skipschannels quickly in step of 10 channels.Tapping [V/M] againreturns to VFO Mode.Reference• Unregistered memory channels are skipped.• By default, the priority memory channel used as the priority channel for the dual receive functionwas set to the memory channel 1. “P” appears at the upper right of the memory channel number(See page 000).
