68Functions Used as NeededSetup MenuAutomatically Turning Off the Power APO FunctionThe FTM-400DR can be set so that it turns off automatically if you do not operate it fora certain period of time. You can change the time until the FTM-400DR is turned offautomatically Use this function after setting the clock, referring to [Setting the Clock(See page 21)].1 Press and hold M over 1 second.The Setup Menu appears.2 Tap [CONFIG].3 Tap [13 APO].The APO setting screen appears.4 Tap [–] or [+] to adjust the time.Specify the time until the FTM-400DR is turned offautomatically in steps of 30 minutes.OFF / 30 min / 1 hour to 12 hours5 Press and hold M over 1 second.The Auto Power Off function is set and the screen returns to the previous one.Reference • Factory Setting: OFFRestricting the Continuous Transmission Time TOT FunctionThe FTM-400DR can be set that it automatically returns to reception state afterperforming continuous transmission for a certain period of time. Accidental transmissionof unnecessary radio waves and unwanted battery power consumption can beprevented (time-out timer function).1 Press and hold M over 1 second.The Setup Menu appears.2 Tap [CONFIG].3 Tap [14 TOT].The time display for TOT appears in orange.4 Turn the O to set the time.Turn the O to set the Time Out time in steps of 5minutes.OFF / 5 min to 30 min5 Press O shortly.The time is set and displayed in green.6 Press and hold M over 1 second.Returns to the previous screen.Reference • Factory Setting: 5 min
