VX-6E O PERATING M ANUAL 59Setting the Channel Counter Sweep WidthYou may change the bandwidth of the Channel Counter. Available selections are ±5, ±10,±50, and ±100 MHz (default: ±5 MHz).Here is the procedure for setting the Channel Counter Bandwidth:1. Press the [F/W] key, then press the [0(SET)] key to enter the Set mode.2. Rotate the DIAL knob to select Set Mode Item 12: CH CNTCH CNTCH CNTCH CNTCH CNT.3. Press the [F/W] key momentarily to enable adjustment of thisSet Mode Item.4. Rotate the DIAL knob to select the desired bandwidth.5. When you have made your selection, press the PTT key to savethe setting and exit to normal operation.CHANNEL C OUNTER O PERATION
