Yaesu VX-6E Operating Manual

Also see for VX-6E: Operating manual Brochure & specs

Contents

VX-6E O PERATING M ANUAL90SET (MENU) M ODESET M ODE I TEM4 [ARS]51 [RPT]56 [SHIFT]SET M ODE I TEM8 [BELL]17 [DCS CD]18 [DCS RV]21 [DT A/M]22 [DT SET]59 [SQL]60 [SQL.TYP]66 [TN FRQ]SET M ODE I TEM2 [AR BEP]3 [AR INT]14 [CW ID]SET M ODE I TEM10 [BNK NM]20 [DMR.WRT]38 [MW MD]39 [NAME]40 [NM SET]SET M ODE I TEM49 [RESUME]55 [SCN.LMP]57 [SKIP]73 [WX ALT]68 [TS MUT]69 [TS SPD]SET M ODE I TEM53 [RXSAVE]70 [TXSAVE]72 [WAKEUP]SET M ODE I TEM29 [INT CD]30 [INT MD]31 [INT.A/M]32 [INT.SET]SET M ODE I TEM23 [EAI]24 [EAI.TMR]26 [EMG S]SET M ODE I TEM43 [PAGER]44 [PAG.ABK]45 [PAG.CDR]46 [PAG.CDT]AVAILABLE V ALUES (DEFAULT)ON / OFFSIMP / –RPT / +RPT0.00 - 149.95 MHzÚ1AVAILABLE V ALUES (DEFAULT)OFF / 1 / 3 / 5 / 8 /CONT (Continuous ringing)104 standard DCS codes (023)DISABLE / ENABLEMANUAL / AUTO---LVL 0 - LVL 15 (NFM: LVL 1),LVL 0 - LVL 8 (WFM: LVL 2)OFF / TONE / T SQL /DCS / RV TN50 standard CTCSS tones (100 Hz)AVAILABLE V ALUES (DEFAULT)IN RNG / ALWAYS / OFF25 SEC / 15 SEC--AVAILABLE V ALUES (DEFAULT)--ON / OFFNEXT / LOWERFREQ / ALPHA--AVAILABLE V ALUES (DEFAULT)3SEC / 5SEC / 10SEC /BUSY / HOLDON / OFFOFF / SKIP / ONLYOFF / ONON / OFFFAST / SLOWAVAILABLE V ALUES (DEFAULT)200 MS / 300 MS / 500 MS /1 S / 2 S / OFFOFF / ONOFF / 5S / 10S / 20S / 30S / EAIAVAILABLE V ALUES (DEFAULT)DTMF 1 - DTMF FSRG / FRGMANUAL / AUTO--AVAILABLE V ALUES (DEFAULT)OFF / ONINT. 1M through INT.10M,INT.15M, INT.20M, INT.30M,INT.40M, INT. 50M,CON. 1M through CON.10M,CON.15M, CON.20M, CON.30M,CON.40M, and CON. 50M(CON. 5M)BP+STR / BEAM / BP+BEM / CW /BP+CW / BEEP / STROBEAVAILABLE V ALUES (DEFAULT)OFF / ONOFF / ON(05_47)(05_47)REPEATER SETTINGEnables/Disables the Automatic Repeater Shift function.Sets the Repeater Shift Direction.Sets the magnitude of the repeater Shift.CTCSS/DCS S ETTINGSelects the number of CTCSS/DCS Bell ringer repetitions.Setting of the DCS code.Enables/Disables "Inverted" DCS code decoding.Enables/Disables the DTMF Autodial feature.Programming of the DTMF Autodialer.Sets the Squelch threshold level.Selects the Tone Encoder and/or Decoder mode.Setting of the CTCSS Tone Frequency.ARTS S ETTINGSelects the Beep option during ARTS operation.Selects the Polling Interval during ARTS operation.Programs and activates the CW Identifier.MEMORY SETTINGStores Alpha-Numeric “Tags” for the Memory Group.Enables/Disables over-written the Direct Memory Recall Channel while operating on the DirectMemory Recall Channel.Selects the method of selection of channels for Memory Storage.Toggles the display indication between “Frequency” and the channel's "Alpha/Numeric Tag."Stores Alpha-Numeric "Tags" for the Memory channels.SCAN S ETTINGSelects the Scan Resume mode.Enables/Disables the Scan lamp while paused.Selects the Memory Scan “Skip•Echannel-selection mode.Enables/Disables the Weather Alert Scan feature.Enables/Disables the receiver audio output during the Tone Serch Scanner is activated.Selects the Tone Serch Scanner speed.POWER SAVING S ETTINGSelects the Receive-mode Battery Saver interval.Enables/Disables the Transmitter Battery Saver.Setting of the Wakeup feature.WIRES TM S ETTINGSelects the Access Number (DTMF digit) for WIRESTM operation.Selects the Internet Link Connection mode.Enables/Disables DTMF Autodialer feature while operating on the Internet Connection feature.Selects the memory register for an Access Number (DTMF code) for non-WIRESTM InternetLink System access.EAI SETTINGEnables/Disables the Emergency Automatic ID (EAI) Feature.Setting of the Emergency Automatic ID (EAI) operating mode and its Transmit Time.Selects the alarm(s) utilized when the Emergency function is engaged.EPCS SETTINGEnables/disables the Enhanced CTCSS Paging & Code Squelch function.Enables/disables the Answer Back function of the Enhanced CTCSS Paging & Code Squelch.Setting the Receiver Pager Code for the Enhanced CTCSS Paging & Code Squelch.Setting the Transmitting Pager Code for the Enhanced CTCSS Paging & Code Squelch.Ú1: Depends on the frequency band.