VX-6R OPERATING MANUAL 354. Press and hold in the PTT switch, then press the [F/W] key once more momentarilywhile holding the PTT switch in (this does not key the transmitter).Whenever you recall a memory which contains indepen-dently-stored transmit and receive frequencies, the“ ” indication will appear in the display.MEMORY RECALL1. While operating in the VFO mode, press the [V/M(DW)MT] keyto enter the Memory mode.2. Rotate the DIAL knob to select the desired channel.3. To return to the VFO mode, press the [V/M(DW)MT] key.When the radio is already set to the Memory mode, an easy way to recall memories is tokey in the memory channel number, then press the [V/M(DW)MT] key.For example, to recall memory channel #14, press [1] [4] [V/M(DW)MT].You may also recall Memory Channel #000 and Programmable Memory channels (“L01/U01” through “L50/U50”) using the following numbers: Memory Channel #000 = “1000,”Programmable Memory channels #L1 = “1001,” U1 = “1002,” L50 = “1099,” and U50 =“1100.” In these case, you do not need to press the [V/M(DW)MT] key.LABELING MEMORIESYou may wish to append an alpha-numeric “Tag” (label) to a memory or memories, to aidin recollection of the channel’s use (such as a club name, etc.). This is easily accomplishedusing the Set Mode.1. Recall the memory channel on which you wish to append a label.2. Press the [F/W] key, then press the [0(SET)] key to enter the Setmode.3. Rotate the DIAL knob to select Set Mode Item 40: NM SET.4. Press the [0(SET)] key momentarily to enable programming ofthe name tag.5. Rotate the DIAL knob to select the first digit of the desired label.6. Press the [MODE(SP S)SQ TYP] key to move to the next char-acter.7. If you make a mistake, press the [BAND(SCN)BND DN] key toback-space the cursor, then re-enter the correct letter, number, orsymbol.8. Repeat steps 5 through 7 to program the remaining letters, numbers, or symbols of theMEMORY STORAGEMEMORY MODE (REGULAR MEMORY CHANNEL)