Components20EMU26011Choke knob for pull typeTo supply the engine with the rich fuel mix-ture required to start, pull out this knob.EMU26070Manual starter handleTo start the engine, first gently pull the han-dle out until resistance is felt. From that posi-tion, then pull the handle straight out quicklyto crank the engine.EMU26090Main switchThe main switch controls the ignition system;its operation is described below. “ ” (off)With the main switch in the “ ” (off) posi-tion, the electrical circuits are off, and the keycan be removed. “ ” (on)With the main switch in the “ ” (on) posi-tion, the electrical circuits are on, and the keycannot be removed. “ ” (start)With the main switch in the “ ” (start) po-sition, the starter motor turns to start the en-gine. When the key is released, it returnsautomatically to the “ ” (on) position.EMU26111Steering friction adjusterA friction device provides adjustable resis-tance to the steering mechanism, and can beset according to operator preference. An ad-juster lever is located on the bottom of thetiller handle bracket.To increase resistance, turn the lever to theport side “A”.To decrease resistance, turn the lever to thestarboard side “B”.WARNINGEWM00040Do not overtighten the friction adjuster. Ifthere is too much resistance, it could bedifficult to steer, which could result in anaccident.ZMU03355ZMU02942
