Yamaha 40v Owner's Manual

Also see for 40V: Owner's manual Service manual Owner's manual Owner's manual Owner's manual

Contents

Yamaha 40v Owner's Manual Manual pdf 71 page image

Maintenance651. Start the engine and allow it to warm upfully in neutral until it is running smooth-ly.2. Once the engine has warmed up, verifywhether the idle speed is set to specifi-cation. For idle speed specifications,see page 9. If you have difficulty verify-ing the idle speed, or the idle speed re-quires adjustment, consult a Yamahadealer or other qualified mechanic.EMU29113Checking wiring and connectors Check that each connector is engaged se-curely. Check that each ground lead is properlysecured.EMU32112Checking propellerWARNINGEWM01881You could be seriously injured if the en-gine accidentally starts when you arenear the propeller. Before inspecting, re-moving, or installing the propeller, placethe shift control in neutral, turn the mainswitch to “ ” (off) and remove the key,and remove the clip from the engine shut-off switch. Turn off the battery cut-offswitch if your boat has one.Do not use your hand to hold the propellerwhen loosening or tightening the propellernut. Put a wood block between the anti-cavi-tation plate and the propeller to prevent thepropeller from turning.Checkpoints Check each of the propeller blades for ero-sion from cavitation or ventilation, or otherdamage. Check the propeller shaft for damage. Check the splines for wear or damage. Check for fish line tangled around the pro-peller shaft. Check the propeller shaft oil seal for dam-age.EMU30662Removing propellerEMU29197Spline models1. Straighten the cotter pin and pull it outusing a pair of pliers.2. Remove the propeller nut, washer, andspacer (if equipped). WARNING! DoZMU03240ZMU01897