Yamaha E40G Service Manual

6F65G11 6-18987654321Drive shaft and lower caseChecking the lower case and lowercase cap1. Check the skeg and torpedo for cracks ordamage. Replace the lower case andlower case cap if necessary.Assembling the lower case1. Install the drive shaft needle bearing intothe lower case to the specified depth.NOTE:Be careful not to the let the stopper get out ofposition when using the driver rod SS.2. Install the washer and new oil seals intothe lower case to the specified depth.3. Install the sleeve and needle bearing intothe lower case to the specified depth.NOTE:9 Install the needle bearing with the manufac-ture identification mark c facing up.9 Be careful not to the let the stopper e getout of position when using the driver rod SL.9 Apply gear oil to the inside and outside ofthe sleeve before installation.6F660750321a768d6F660740ce6F66076054bBall bearing attachment 1:90890-06616Driver rod SS 2:90890-06604Bearing depth plate 3:90890-06603Driver rod SL 6 : 90890-06602Needle bearing attachment 7:90890-06613Bearing depth plate 8:90890-06603Depth a:24.7—25.3 mm (0.97—1.00 in)Depth b:2.2—2.8 mm (0.09—0.11 in)Depth d:75.2—75.8 mm (2.96—2.98 in)Ball bearing attachment 4:90890-06637Driver rod SS 5:90890-06604