Specifications and requirements9EMU34520SpecificationsTIP:“(AL)” stated in the specification data belowrepresents the numerical value for the alumi-num propeller installed.Likewise, “(SUS)” represents the value forstainless steel propeller installed and “(PL)”for plastic propeller installed.TIP:“*” means, select the engine oil referring to thechart of engine oil paragraph. For further infor-mation, see page 12.EMU2821JDimension:Overall length:862 mm (33.9 in)Overall width:F150AET 511 mm (20.1 in)F150BET 512 mm (20.2 in)FL150AET 511 mm (20.1 in)FL150BET 512 mm (20.2 in)Overall height L:F150AET 1714 mm (67.5 in)Overall height X:1842 mm (72.5 in)Transom height L:F150AET 516 mm (20.3 in)Transom height X:643 mm (25.3 in)Weight (SUS) L:F150AET 219.0 kg (483 lb)Weight (SUS) X:F150AET 224.0 kg (494 lb)F150BET 229.0 kg (505 lb)FL150AET 224.0 kg (494 lb)FL150BET 229.0 kg (505 lb)Performance:Full throttle operating range:F150AET 5000–6000 r/minF150BET 4500–5500 r/minFL150AET 5000–6000 r/minFL150BET 4500–5500 r/minMaximum output:F150AET 110.3 kW@5500 r/min (150HP@5500 r/min)F150BET 110.3 kW@5000 r/min (150HP@5000 r/min)FL150AET 110.3 kW@5500 r/min (150HP@5500 r/min)FL150BET 110.3 kW@5000 r/min (150HP@5000 r/min)Idle speed (in neutral):700 ±50 r/minEngine:Type:4-stroke LDisplacement:2670.0 cm³Bore × stroke:94.0 × 96.2 mm (3.70 × 3.79 in)Ignition system:TCISpark plug (NGK):LFR5A-11Spark plug gap:1.0–1.1 mm (0.039–0.043 in)Control system:Remote controlStarting system:Electric starterStarting carburetion system:Electronic fuel injectionValve clearance (cold engine) IN:0.17–0.23 mm (0.0067–0.0091 in)Valve clearance (cold engine) EX:0.31–0.37 mm (0.0122–0.0146 in)