Specifications and requirements10Min. cold cranking amps (CCA/EN):711.0 AMin. rated capacity (20HR/IEC):100.0 AhMaximum generator output:36 ADrive unit:Gear positions:Forward-neutral-reverseGear ratio:2.00(28/14)Trim and tilt system:Power trim and tiltPropeller mark:F150AET MF150BET MFL150AET MLFL150BET MLFuel and oil:Recommended fuel:Regular unleaded gasolineMin. research octane:F150AET 90F150BET 84FL150AET 90FL150BET 84Recommended engine oil:4-stroke outboard motor oilRecommended engine oil group 1*:SAE 10W-30/10W-40/5W-30API SE/SF/SG/SH/SJ/SLRecommended engine oil group 2*:SAE 15W-40/20W-40/20W-50API SH/SJ/SLTotal engine oil quantity (oil pan capacity):5.2 L (5.50 US qt, 4.58 Imp.qt)Lubrication:Wet sumpRecommended gear oil:Hypoid gear oil SAE#90Gear oil quantity:F150AET 0.980 L (1.036 US qt,0.862 Imp.qt)F150BET 0.980 L (1.036 US qt,0.862 Imp.qt)FL150AET 0.870 L (0.920 US qt,0.766 Imp.qt)FL150BET 0.870 L (0.920 US qt,0.766 Imp.qt)Tightening torque for engine:Spark plug:25.0 Nm (2.55 kgf-m, 18.4 ft-lb)Propeller nut:55.0 Nm (5.61 kgf-m, 40.6 ft-lb)Engine oil drain bolt:28.0 Nm (2.86 kgf-m, 20.7 ft-lb)Engine oil filter:18.0 Nm (1.84 kgf-m, 13.3 ft-lb)Noise and vibration level:Operator sound pressure level (ICOMIA39/94 and 40/94):79.6 dB(A)EMU33554Installation requirementsEMU33564Boat horsepower ratingWARNINGEWM01560Overpowering a boat can cause severe in-stability.Before installing the outboard motor(s), con-firm that the total horsepower of your out-board motor(s) does not exceed the boatsmaximum horsepower rating. See the boat’scapacity plate or contact the manufacturer.