Components27WARNINGEWM01771 If the friction is too small, the control le-ver could move freely and cause an ac-cident. Do not overtighten the friction adjuster.If there is too much resistance, it couldbe difficult to move the control lever,which could result in an accident.When constant speed is desired, tighten theadjuster to maintain the desired throttle set-ting.EMU25996Engine shut-off cord (lanyard) andclipThe clip must be attached to the engine shut-off switch for the engine to run. The cordshould be attached to a secure place on theoperator’s clothing, or arm or leg. Should theoperator fall overboard or leave the helm, thecord will pull out the clip, stopping ignition tothe engine. This will prevent the boat fromrunning away under power. WARNING! At-tach the engine shut-off cord to a secureplace on your clothing, or your arm or legwhile operating. Do not attach the cord toclothing that could tear loose. Do notroute the cord where it could become en-tangled, preventing it from functioning.Avoid accidentally pulling the cord dur-ing normal operation. Loss of enginepower means the loss of most steeringcontrol. Also, without engine power, theboat could slow rapidly. This could causepeople and objects in the boat to bethrown forward. [EWM00123]ZMU05820ZMU058191. Engine shut-off cord (lanyard)2. Clip3. Engine shut-off switch123ZMU07143123ZMU07144
