INSTRUMENT AND CONTROL FUNCTIONS3-63EAU26861Multi-function displayThe multi-function display is equippedwith the following: a fuel meter a coolant temperature meter an odometer (which shows the to-tal distance traveled) two tripmeters (which show thedistance traveled since they werelast set to zero) a fuel reserve tripmeter (whichshows the distance traveled on thefuel reserve) a self-diagnosis device a clockOdometer and tripmeter modesPushing the “SELECT” button switchesthe display between the odometermode “ODO” and the tripmeter modes“TRIP” in the following order:ODO → TRIP (top) → TRIP (bottom) →ODOWhen approximately 5.0 L (1.32 USgal) (1.10 Imp.gal) of fuel remains in thefuel tank, the display will automaticallychange to the fuel reserve tripmetermode “TRIP F” and start counting thedistance traveled from that point. In thatcase, pushing the “SELECT” buttonswitches the display between the vari-ous tripmeter and odometer modes inthe following order:TRIP F → TRIP (top) → TRIP (bottom)→ ODO → TRIP FTo reset a tripmeter, select it by push-ing the “SELECT” button, and thenpush the “RESET” button for at leastone second. If you do not reset the fuelreserve tripmeter manually, it will resetitself automatically and the display willreturn to the prior mode after refuelingand traveling 5 km (3 mi).Self-diagnosis deviceThis model is equipped with a self-diag-nosis device for various electrical cir-cuits.If any of those circuits are defective, themulti-function display will indicate atwo-digit error code (e.g., 11, 12, 13).If the multi-function display indicatessuch an error code, note the code num-ber, and then have a Yamaha dealercheck the vehicle.CAUTION:ECA11790If the multi-function display indi-cates an error code, the vehicleshould be checked as soon as pos-sible in order to avoid engine dam-age.This model is also equipped with a self-diagnosis device for the immobilizersystem.If any of the immobilizer system circuitsare defective, the immobilizer systemindicator light will flash, and then themulti-function display will indicate atwo-digit error code (e.g., 51, 52, 53)when the key is turned to “ON”.1. Multi-function display2. “SELECT” button3. “RESET” buttonU5JWE4E0.book Page 6 Friday, July 30, 2004 6:07 PM