INSTRUMENT AND CONTROL FUNCTIONS3-73NOTE:If the multi-function display indicates er-ror code 52, this could be caused bytransponder interference. If this errorappears, try the following.1. Use the code re-registering key tostart the engine.NOTE:Make sure there are no other immobi-lizer keys close to the main switch, anddo not keep more than one immobilizerkey on the same key ring! Immobilizersystem keys may cause signal interfer-ence, which may prevent the enginefrom starting.2. If the engine starts, turn it off, andtry starting the engine with thestandard keys.3. If one or both of the standard keysdo not start the engine, take thevehicle, the code re-registeringkey and both standard keys to aYamaha dealer and have the stan-dard keys re-registered.If the multi-function display indicatesany error codes, note the code number,and then have a Yamaha dealer checkthe vehicle.Clock modeTo set the clock:1. Push the “SELECT” button and“RESET” button together for atleast two seconds.2. When the hour digits start flashing,push the “RESET” button to set thehours.3. Push the “SELECT” button, andthe minute digits will start flashing.4. Push the “RESET” button to setthe minutes.5. Push the “SELECT” button andthen release it to start the clock.EAU12330Anti-theft alarm (optional)This model can be equipped with anoptional anti-theft alarm by a Yamahadealer. Contact a Yamaha dealer formore information.U5JWE4E0.book Page 7 Friday, July 30, 2004 6:07 PM
