SPECIFICATIONS8-18Dimensions:Overall length:2195 mm (86.4 in)Overall width:760 mm (29.9 in)Overall height:1435 mm (56.5 in)Seat height:805 mm (31.7 in)Wheelbase:1515 mm (59.6 in)Ground clearance:135 mm (5.31 in)Minimum turning radius:3100 mm (122.0 in)Weight:With oil and fuel:FJR1300 275.0 kg (606 lb)FJR1300A 282.0 kg (622 lb)Engine:Engine type:Liquid cooled 4-stroke, DOHCCylinder arrangement:Forward-inclined parallel 4-cylinderDisplacement:1298.0 cm³ (79.20 cu.in)Bore × stroke:79.0 × 66.2 mm (3.11 × 2.61 in)Compression ratio:10.80 :1Starting system:Electric starterLubrication system:Wet sumpEngine oil:Type:SAE20W40Recommended engine oil grade:API service SE, SF, SG type or higherEngine oil quantity:Without oil filter cartridge replacement:3.80 L (4.02 US qt) (3.34 Imp.qt)With oil filter cartridge replacement:4.00 L (4.23 US qt) (3.52 Imp.qt)Final gear oil:Type:Shaft drive gear oilQuantity:0.20 L (0.21 US qt) (0.18 Imp.qt)Cooling system:Coolant reservoir capacity (up to themaximum level mark):0.25 L (0.26 US qt) (0.22 Imp.qt)Radiator capacity (including all routes):3.20 L (3.38 US qt) (2.82 Imp.qt)Air filter:Air filter element:Dry elementFuel:Recommended fuel:Regular unleaded gasoline onlyFuel tank capacity:25.0 L (6.61 US gal) (5.50 Imp.gal)Fuel reserve amount:5.0 L (1.32 US gal) (1.10 Imp.gal)Electronic fuel injection:Manufacturer:NIPPON INJECTORModel:INP-732/4Spark plug(s):Manufacturer/model:NGK/CR8EManufacturer/model:DENSO/U24ESR-NSpark plug gap:0.7–0.8 mm (0.028–0.031 in)Clutch:Clutch type:Wet, multiple-discTransmission:Primary reduction system:Helical gearPrimary reduction ratio:75/48 (1.563)Secondary reduction system:Shaft driveSecondary reduction ratio:35/36 × 21/27 × 33/9 (2.773)Transmission type:Constant mesh 5-speedOperation:Left foot operationGear ratio:1st:43/17 (2.529)2nd:39/22 (1.773)3rd:31/23 (1.348)4th:28/26 (1.077)U5JWE4E0.book Page 1 Friday, July 30, 2004 6:07 PM