INSTRUMENT AND CONTROL FUNCTIONS3-63EAU00118Handlebar switchesEAU03888Dimmer switch “ / ”Set this switch to “ ” for the highbeam and to “ ” for the low beam.EAU03889Turn signal switch “ / ”To signal a right-hand turn, push thisswitch to “ ”. To signal a left-handturn, push this switch to “ ”. Whenreleased, the switch returns to the cen-ter position. To cancel the turn signallights, push the switch in after it has re-turned to the center position.EAU00129Horn switch “ ”Press this switch to sound the horn. EAU03890Engine stop switch “ / ”Set this switch to “ ” before startingthe engine. Set this switch to “ ” tostop the engine in case of an emergen-cy, such as when the motorcycle over-turns or when the throttle cable isstuck.EAU00143Start switch “ ”Push this switch to crank the enginewith the starter. EC000005CAUTION:_See page 5-1 for starting instruc-tions prior to starting the engine._1. Dimmer switch “ / ”2. Turn signal switch “ / ”3. Horn switch “ ”1. Engine stop switch “ / ”2. Start switch “ ”U5LV12.book Page 6 Thursday, June 27, 2002 5:49 PM
