PERIODIC MAINTENANCE AND MINOR REPAIR6-436EAU03963To install the front wheel1. Lift the wheel up between the forklegs.2. Insert the wheel axle.3. Lower the front wheel so that it ison the ground.4. Install the brake calipers by install-ing the bolts.NOTE:_Make sure that there is enough spacebetween the brake pads before install-ing the brake calipers onto the brakediscs._5. Install the brake hose holders byinstalling the bolts.6. Tighten the wheel axle, the wheelaxle pinch bolt and the brake cali-per bolts to the specified torques.7. Push down hard on the handlebarseveral times to check for properfork operation. EAU03964Rear wheelTo remove the rear wheel EW000122WARNING_ It is advisable to have a Yamahadealer service the wheel. Securely support the motor-cycle so that there is no dangerof it falling over._1. Loosen the axle nut and the brakecaliper bolts.2. Place the motorcycle on the cen-terstand.Tightening torques:Wheel axle:72 Nm (7.2 m·kgf, 52 ft·lbf)Front wheel axle pinch bolt:23 Nm (2.3 m·kgf, 17 ft·lbf)Brake caliper bolt:40 Nm (4.0 m·kgf, 29 ft·lbf)1. Axle nutU5LV12.book Page 43 Thursday, June 27, 2002 5:49 PM
