Yamaha FZ8-N Owner's Manual

Also see for FZ8: Owner's manual Owner's manual

Contents

OPERATION AND IMPORTANT RIDING POINTS5-15EAU15951Read the Owner’s Manual carefully tobecome familiar with all controls. Ifthere is a control or function you do notunderstand, ask your Yamaha dealer.WARNINGEWA10271Failure to familiarize yourself withthe controls can lead to loss of con-trol, which could cause an accidentor injury.EAU48710TIPThis model is equipped with: a lean angle sensor to stop the en-gine in case of a turnover. In thiscase, the multi-function display in-dicates error code 30, but this isnot a malfunction. Turn the key to“OFF” and then to “ON” to clear theerror code. Failing to do so will pre-vent the engine from starting eventhough the engine will crank whenpushing the start switch. an engine auto-stop system. Theengine stops automatically if leftidling for 20 minutes. If the enginestops, simply push the start switchto restart the engine.EAU3935AStarting the engineIn order for the ignition circuit cut-offsystem to enable starting, one of thefollowing conditions must be met. The transmission is in the neutralposition. The transmission is in gear withthe clutch lever pulled and thesidestand up.See page 3-22 for more informa-tion.1. Turn the key to “ON” and makesure that the engine stop switch isset to “ ”.The following warning lights andindicator light should come on for afew seconds, then go off. Oil level warning light Coolant temperature warninglight Engine trouble warning light Immobilizer system indicatorlightNOTICEECA11833If a warning or indicator light doesnot come on initially when the key isturned to “ON”, or if a warning or in-U39PE0E0.book Page 1 Tuesday, February 16, 2010 9:22 AM