PERIODIC MAINTENANCE AND ADJUSTMENT7-387EAU24360Front wheelEAU49831To remove the front wheelWARNINGEWA10821To avoid injury, securely support thevehicle so there is no danger of itfalling over.1. Loosen the front wheel axle pinchbolt, then the wheel axle and thebrake caliper bolts.2. Lift the front wheel off the groundaccording to the procedure in theprevious section “Supporting themotorcycle”.3. Remove the brake hose holder oneach side by removing the bolt andnut.4. Remove the brake caliper (togeth-er with the reflector) on each sideby removing the bolts. NOTICE:Do not apply the brake after thebrake calipers have been re-moved, otherwise the brakepads will be forced shut. [ECA11051]5. Pull the wheel axle out, and thenremove the wheel.EAU49841To install the front wheel1. Lift the wheel up between the forklegs.2. Insert the wheel axle.3. Lower the front wheel so that it ison the ground, and then put thesidestand down.4. Install the brake calipers (togetherwith the reflectors) by installing thebolts.1. Front wheel axle pinch bolt2. Wheel axle3. Brake caliper bolt3211. Brake hose holder2. Bolt and nut12 1. Brake caliper bolt2. Brake caliper3. Reflector123
