Yamaha MT-10 2021 Owner's Manual

Instrument and control functions5-1512345678910111213records up to forty laps. On the mainscreen, the lap timer shows the currentlap time and lap number (indicated bythe LAP mark). Use the Dimmer/Passswitch “ / /PASS” to mark laptimes. When a lap is completed, the laptimer will show the latest lap time(marked by the LATEST indicator) forfive seconds.To use the lap timer1. While in TRACK MODE, shortpush the wheel switch. The infor-mation display will flash for fiveseconds.2. While the information display itemis flashing, rotate the wheel switchupward. The lap timer will flash forfive seconds.3. While the lap timer is flashing, longpush the wheel switch to activatethe lap timer or stop the lap timer.4. When the lap timer has been acti-vated and the headlight is set onlow beam, push the switch downtowards “PASS” to flash the highbeam and start the timer.TIP The engine must be running to usethe lap timer. Set the information display toFASTEST or AVERAGE for addi-tional lap time information. Accessing the MENU screen willautomatically stop the lap timer. Whenever the lap timer is stopped,the current lap will not be record-ed. The lap time record can be viewedand reset from the MENU screen.EAU93645MENU screenThe MENU main screen contains thefollowing setting modules.1. Lap time2. Latest lap time indicator “LATEST”3. Information display item4. Lap number123412LAP 0956 NGEARQS LIF 1 12:00EBM 1MODE-A PWR 1 TCS 3 SCS 11000 r/minOFF1234.5TRIP-1MPH mile3412Module DescriptionDisplay ModeSwitch the display betweenSTREET MODE andTRACK MODEYRC Setting Adjust YRC settingsLap Time View and reset lap timesMaintenanceView and resetmaintenance intervaltripmetersUnit Set fuel consumption anddistance unitsWallpaper Set display backgroundcolorsShift IndicatorTurn the shift indicator on/off and adjust tachometersettingsDisplay Setting Select the informationdisplay groupingsYRC SettingLap TimeMaintenanceUnitWallpaperDisplay ModeMENU GPS 10:00MPH