Yamaha MT-10 2021 Owner's Manual

For your safety – pre-operation checks6-212345678910111213Rear brake• Check operation.• If soft or spongy, have Yamaha dealer bleed hydraulic system.• Check brake pads for wear.• Replace if necessary.• Check fluid level in reservoir.• If necessary, add specified brake fluid to specified level.• Check hydraulic system for leakage.8-22, 8-23Clutch• Check operation.• Lubricate cable if necessary.• Check lever free play.• Adjust if necessary.8-20Throttle grip • Check for smooth rotation and automatic return. 8-26Control cables • Make sure that operation is smooth.• Lubricate if necessary. 8-26Drive chain• Check chain slack.• Adjust if necessary.• Check chain condition.• Lubricate if necessary.8-24, 8-25Wheels and tires• Check for damage.• Check tire condition and tread depth.• Check air pressure.• Correct if necessary.8-17, 8-20Brake and shift pedals • Make sure that operation is smooth.• Lubricate pedal pivoting points if necessary. 8-27Brake and clutch levers • Make sure that operation is smooth.• Lubricate lever pivoting points if necessary. 8-27Sidestand • Make sure that operation is smooth.• Lubricate pivot if necessary. 8-28Chassis fasteners • Make sure that all nuts, bolts and screws are properly tightened.• Tighten if necessary. —Instruments, lights, signalsand switches• Check operation.• Correct if necessary. —Sidestand switch • Check operation of ignition circuit cut-off system.• If system is not working correctly, have Yamaha dealer check vehicle. 5-38ITEM CHECKS PAGE