Yamaha MT125 2023 Owner's Manual

Periodic maintenance and adjustment7-3173. Remove the burnt-out bulb bypulling it out.4. Insert a new bulb into the socket.5. Install the socket (together withthe bulb) by turning it clockwise.6. Install the turn signal light lens byinstalling the screw. NOTICE: Donot overtighten the screw, oth-erwise the lens may break.[ECA11192]EAUM3511Replacing the license platelight bulb1. Remove the license plate light unitby removing the screw.2. Remove the license plate lightbulb socket (together with thebulb) by pulling it out.3. Remove the burnt-out bulb bypulling it out.4. Insert a new bulb into the socket.5. Install the socket (together withthe bulb) by pushing it in.6. Install the license plate light unit byinstalling the screw.EAU67131Supporting the motorcycleSince this model is not equipped with acenterstand, use maintenance standswhen removing the front or rear wheelor when performing other maintenancethat requires the motorcycle to standup right.Check that the motorcycle is in a stableand level position before starting anymaintenance.1. Turn signal light bulbZAUM160911. License plate light bulb socket2. License plate light unit3. ScrewZAUM1621231. Maintenance stand (example)1