Yamaha R-S500 Owner's Manual

Also see for R-S500: Owner's manual Owner's manual Owner's manual Owner's manual Owner's manual

Contents

24 EnFM/AM TUNINGYou can recall preset stations that were registered usingautomatic station preset or manual station preset.1 Press PRESET j / i on the front panel (orPRESET F / G on the remote control) toselect a preset number.y• Preset numbers to which no stations are registered are skipped.• “NO PRESETS” is displayed if no stations are registered.• You can directly select a preset number by pressing the numericbuttons on the remote control while recalling a preset station.“EMPTY” is displayed on the display if you enter a presetnumber to which no station is registered. “WRONG NUM.” isdisplayed if you enter an invalid number.• When you press the numeric buttons on the remote controlduring normal tuning, a frequency is entered. Set the tuningmode to preset tuning mode using PRESET j / i on the frontpanel (or PRESET F / G on the remote control) beforepressing numeric buttons.Follow the steps below to clear a preset station.1 Select the desired preset station number.See “Recalling a preset station” on page 24.2 Press CLEAR on the front panel.The selected preset number flashes on the front paneldisplay.yTo cancel clearing the preset station, press RETURN on theremote control or leave this unit without any operations for about30 seconds.3 Press CLEAR on the front panel to confirm.“PXX: CLEARED” (XX indicates the presetnumber) is displayed on the front panel display, andthen the display returns to its original state.Recalling a preset stationPRESET j / iPRESET F / GClearing a preset stationCLEARRETURN