Yamaha RX V365 - AV Receiver Owner's Manual

Contents

18 EnPlaybackUse the following features to select input jack or inputsource.■ Selecting the front speaker setPress CSPEAKERS repeatedly change theactive front speaker set that is connected to theFRONT A or FRONT B speaker terminals or turnoff the front speakers.The active front speaker set changes as follows:Note• Turn off the volume level of this unit before you switch the front speakersetting.■ Using the Zone B featureWhen you set “FRONT B” to “ZONE B” (see page 32),you can use the speakers connected to FRONT B speakerterminals in another room (Zone B).Press CSPEAKERS on the front panelrepeatedly to turn on or off the Zone B speakers.When you activate the Zone B speakers, all the speakers inthe main room are muted.Notes• You cannot activate both the main room and Zone B speakerssimultaneously.• If you select CINEMA DSP sound field program and activate the Zone Bspeakers, Virtual CINEMA DSP is activated automatically (see page 26).■ Selecting the component connected to theMULTI CH INPUT jacks as the input sourceUse this feature to select the component connected to theMULTI CH INPUT jacks (see page 14) as the inputsource.Press NINPUT l / h repeatedly (or presshAMP and then press vMULTI CH IN) toselect “MULTI CH.”“MULTI CH” appears on the front panel display.y• You can configure the multi channel input settings in “MULTI CH” (seepage 14).Notes• Sound field programs, or the night listening mode, etc. cannot be selectedwhen “MULTI CH” is selected as the input source.• When headphones are used, signals are output only from the front leftand right channels.■ Selecting audio input jacks (AUDIO SELECT)Use this feature (audio input jack select) to switch theinput jack assigned to an input source when two or morejacks are assigned to an input source.y• We recommend that you set the audio input jack select to “AUTO” inmost cases.• You can adjust the default audio input jack select of this unit by using“AUDIO SELECT” in “OPTION MENU” (see page 36).1 Press NINPUT l / h repeatedly (or pressone of the input selector buttons (f)) toselect the desired input source.2 Press hAMP and then wAUDIO SELrepeatedly to select the desired Audio inputjack select setting.y• You can configure the audio input jack select setting in “AUDIOSELECT.”Note• This feature is not available if no digital input jack is assigned tothe selected input source in “INPUT ASSIGN” (see page 34).Guide to contentsWhen you want... See pageAdjust the tonal quality of the frontspeakers19Edit parameters of sound fieldprograms26Enjoy the sources which have widedynamic range at night19Use headphones 19Select a decoder to play backsources with26Set this unit to the standby modeautomatically20Additional operationsUsing input setting featuresFRONT A FRONT BOFFChoice FunctionAUTO Automatically selects input signals inthe following order:(1) Digital signals(2) Analog signalsANALOG Selects only analog signals. If noanalog signals are input, no sound isoutput.A.SEL:AUTODVR DVD CDV-AUX DTV/CBL MD/CD-R TUNERAudio input jack select setting