Yamaha RX-V367 Owner's Manual

Also see for RX-V367: Owner's manual Service manual Diagram Owner's manual Quick reference guide

Contents

En 10CONNECTIONSConnecting speakersSpeaker layout5.1-channel speaker layout (5 speakers + subwoofer)Connecting speakersConnect your speakers to their respective terminals on the rear panel.• Connect at least two speakers (front left and right).• If you cannot connect all five speakers, give priority to the surround speakers.• The surround speakers should be placed between 60 degrees and 80 degrees from the listening position.■ CRT monitorsWe recommend that you use magnetically shielded speakers to avoid video distortion, especially forthe front and center speakers near the screen.If your screen still gets interference from magnetically shielded speakers, move the speakers fartheraway from your TV.60q60q 80q80qFront speaker RFront speaker LCenter speakerSurround speaker LSurroundspeaker RSubwooferCAUTION• Remove the AC power cord of this unit from the power outlet before connecting the speakers.• Generally speaker cables consist of two parallel insulated cables. One of these cables is a differentcolor, or has a line running along it, to indicate different polarity. Insert the different colored (or lined)cable into the “+” (positive, red) terminal on this unit and the speakers, and the other cable into the “-”(minus, black) terminal.• Be careful that the core of the speaker cable does not touch anything or come into contact with the metalareas of this unit. This may damage this unit or the speakers. If the speaker cables short circuit,“CHECK SP WIRES!” will appear on the front panel display when this unit is switched on.ANTENNAFM GND AMAUDIO 2CENTERSURROUNDHDMI 4FRONTOR OUTSUBWOOFERAUDIOOUTSPEAKERSR LR LSurround speakerFront speakerSubwoofer Center speaker