Yamaha RX-V367 Owner's Manual

Also see for RX-V367: Owner's manual Service manual Diagram Owner's manual Quick reference guide

Contents

En 44SETUPAlthough the sound field programs would satisfy you as they are with the default parameters, you can arrange the effect by setting the sound field elements (parameters).To adjust the sound effects suitable for acoustical conditions of audio/video sources or rooms, perform the following operations.Setting sound field parameters1 Press iSETUP to display the Setup menu.2 Use jCursor B / C to select “DSPParameter” and press jENTER.3 Use jCursor D / E to choose the soundfield program you want to edit.4 Press jCursor B / C to select theparameter that you want to change, andpress jCursor D / E to change theparameter.5 Once you have completed editing, pressiSETUP to close the Setup menu.■ CINEMA DSP parametersChange the effect level (level of the sound field effect tobe added). You can adjust the level of the sound fieldeffect while checking the sound effect.Setting sound field program parametersiSETUPjCursor B / C / D / EjENTERSETUPENTER7 85 69 0 101 2 3 4RECENTTVTV VOL TV CHINPUTMUTERECEIVERSCENEOPTIONRETURNVOLUMEENHANCER SUR. DECODESTRAIGHTHDMIAVAUDIOTRANSMITSLEEP1 2 3 41 2 3 41 25V-AUXTUNERFMINFO MEMORYAMPRESET TUNINGMOVIE MUSIC STEREOBDDVD TV CD RADIOMUTETOPMENU POP-UPMENUDISPLAYSOURCECODE SET[ C ][ A ] [ B ]jiSWCLSL SRRDSPParameterSETUP VOL.SWCLSL SRRSci-FiDSPPRM VOL.Sound field program to be editedWhen there are multiple parameters in the sound fieldprogram you are configuring, repeat step 4 asnecessary to change other parameters.■ To initialize the sound field parametersTo set the parameters of the sound field program backto default, press jCursor C repeatedly duringediting to select “Initialize” and press jCursor E.When “Press Again >” is displayed, press jCursorE again to initialize.To cancel operations, press jCursor D when “PressAgain” appears and return to the original display.SWCLSL SRRDSPLevel;;0dBDSPPRM VOL.Sound field parameter ChoicesSWCLSL SRRInitializeDSPPRM VOL.DSP LevelAdjustable range -6 dB to 0 dB to +3 dBDefault setting 0 dBAdjust “DSP Level” as follows:• The effect sound is too soft.• There are no differences between effects of the soundfield programs.→ Increase the effect level.• The sound is dull.• The sound field effect is added too much.→ Reduce the effect level.