En 48SETUPControlling other components with the remote controlResetting all remote control codesResetting all remote control codes for externalcomponents to the initial factory settings.1 Press nCODE SET on the remote controlusing a pointed object such as the tip of aballpoint pen.2 Press iSETUP on the remote control.3 Enter “9981” using lNumeric keys.iSETUPlNumeric keysnCODE SETSETUP7 85 69 0 101 2 3 4ENTCODE SETRECTVTV VOL TV CHINPUTMUTERECEIVERSCENEOPTIONRETURNVOLUMEENHANCER SUR. DECODESTRAIGHTHDMIAVAUDIOTRANSMITSLEEP1 2 3 41 2 3 41 25V-AUXTUNERFMINFO MEMORYAMPRESET TUNINGMOVIE MUSIC STEREOBDDVD TV CD RADIOMUTEENTERTOPMENU POP-UPMENUDISPLAYSOURCE[ C ][ A ] [ B ]nliPerform each of the following steps within 1 minute.Settings will be automatically stopped if more than 1minute passes since the last operation. To reset, repeatfrom step 2.TRANSMITRECEIVERHDMISLEEPSOURCECODE SETblinks twiceOnce the remote control code is registeredsuccessfully the remote control will blink twice.If setup fails, repeat from step 1.9 9 8 1TRANSMITRECEIVERHDMISLEEPSOURCECODE SETRegistration successful: blinks twiceRegistration failed: blinks 6 times
