Yamaha RX-Z1 Owner's Manual

Also see for CinemaDSP digital RX-Z1: Owner's manual Service manual

Contents

I[,,_,_o_Never connect this unit and other components to mains power until all connections between components have been completed.• Some components require different connection methods and have different jack names. Refer to the operation instructions for eachcomponent also.• Input and output jacks for the pin jacks are color-coded depending on the signal type.• When connecting input and output jacks, use commercially available cables (pin-plug cable, fiber-optic cable, coaxial cable and S-Videocable).• When this unit interferes with the other components, replace this unit apart from those components. To prevent the interference with othercomponents, it is recommended that an external antenna is placed and coaxial cables are used for connections.Connecting audioonents _ P.Connecting videocomponents _ P.\Connecting the antennas Connecting the powersupply cords _ RII I1_1os@@£@ @cu-R£@ @£@ @£ @@ @o@Connecting digital jacks Connecting othercomponents _ P.Connecting speakersE-18