Yamaha RX10RTL Owner's Manual

Also see for RX10RL: Supplemental service manual

Contents

Yamaha RX10RTL Owner's Manual Manual pdf 23 page image

5-4ESU04710Speedometer unitThe speedometer unit is equipped with the following: a digital speedometer (which shows the riding speed) an odometer (which shows the total distance trav-eled) two tripmeters (which show the distance traveledsince they were last set to zero) a barometer (which shows the ambient barometricpressure) a clock warning indicators (which show self-diagnosis, cool-ant temperature, fuel level, and oil level warnings) a fuel meter (which shows the fuel remaining in thefuel tank) a grip/thumb warmer level indicator (which shows thegrip warmer level or the thumb warmer level) display brightness control functionAfter the engine is started, the tachometer 1 makes onesweep, and the low coolant temperature indicatorlight 2, the warning light 3, and all segments of themeter display 4 turn on and off once.The grip warmer level is initially displayed for 5 seconds,then the display switches to the fuel meter.Odometer, tripmeter, and barometer modesPushing the “SELECT” button 1 switches the displaybetween the odometer mode “ODO”, tripmeter modes“TRIP A” and “TRIP B”, and barometer mode “BARO”.To reset a tripmeter, push the “RESET” button for at least1 second while the tripmeter is displayed.NOTE:@ To switch the speedometer, odometer, and tripmeterdisplays between kilometers and miles, select theodometer mode “ODO”, and then push the “SELECT”button for at least 10 seconds while the snowmobileis stopped. To switch the barometer display between hectopascal“hPa” and inches of mercury “inHg”, select thebarometer mode “BARO”, and then push the“SELECT” button for at least 3 seconds while thesnowmobile is stopped.@