5-11ESU04130Rear suspension damping force remote adjust-ment dialTurn the remote adjustment dial to adjust the rear sus-pension damping force. (See page 8-25 for adjustmentprocedures.)1 Rear suspension damping force remote adjustmentdialESU00039Headlight beam switchPush the headlight beam switch to change the headlightbeam to high or low.1 Headlight beam switch2 Push3 High beam4 Low beamESU04301Auxiliary DC jackThe auxiliary DC jack is located in the front panel andcan be used for accessories.NOTE:@The auxiliary DC jack cannot be used if the engine is notrunning.@1. Start the engine.2. Open the auxiliary DC jack cap 1, and then insertthe accessory power plug into the jack 2.NOTE:@After using the auxiliary DC jack, be sure to remove theaccessory power plug from the jack and close the auxil-iary DC jack cap.@
