8-20Adjusting the chain tension1. Remove the shroud and the right side cover. (Seepages 8-5–8-7 for removal procedures.)2. Loosen the locknut.3. Turn the adjusting bolt clockwise until it is finger tight,and then loosen it 1/4 turn.4. Hold the adjusting bolt in place while tightening thelocknut.1 Locknut2 Adjusting bolt5. Install the right side cover and the shroud.ESU00174Checking the brake padsCheck the brake pads for wear.If the brake pads reach the wear limit, ask a Yamahadealer to replace them.1 Brake pad wear indicatorESU00352Checking the parking brake padsCheck the parking brake pads for wear by measuring thethickness of the pads. If the parking brake pads reachthe wear limit, ask a Yamaha dealer to replace them.AdjustmentAs the parking brake pads wear, adjustment may be nec-essary to ensure proper brake performance.WARNING@Be sure to have a Yamaha dealer make this adjust-ment.@Wear limit a: 1.2 mm (0.05 in)Wear limit a: 1.0 mm (0.04 in)
