Yamaha RX10RW Owner's Manual
Also see for RX10MSW: Supplementary service manual
                                                                                                            | |
Contents
| 
5-9ESU00031Engine stop switchThe engine stop switch 1 is used to stop the engine inan emergency. Simply push 2 the stop switch to stop theengine. To start the engine, pull 3 the stop switch andproceed with starting the engine. (See page 7-1 for moredetails.)During the first few rides, practice using the stop switchso that you can react quickly in an emergency.ESU00033Brake leverThe snowmobile is stopped by braking the entire drivesystem.Squeeze the brake lever towards the handlebar grip tostop the snowmobile.1 Brake lever2 Brake lever end3 Handlebar endNOTE:@When the brake lever is operated, the brake light will illu-minate.@CAUTION:@Make sure that the brake lever end does not projectout over the handlebar end. This will help preventbrake lever damage when the snowmobile is placedon its side for service.@The brake lever is equipped with a position adjuster.To adjust the brake lever position:1. Loosen the locknut 1.2. While lightly pushing the brake lever in direction a,finger tighten the adjusting bolt 2 to set the brakelever to the desired position.3. Tighten the locknut securely after adjusting the brakelever.E_8fp.book Page 9 Tuesday, March 28, 2006 4:35 PM |
Related manuals for Yamaha RX10MSW
manualsdatabase
Your AI-powered manual search engine