14 EnSettingsOnce you program the unit, you can control it with your TV’s remote control for functionssuch as turning on/off the TV and unit simultaneously, or volume up/down and muting/unmuting of the unit.1 Turn off the TV.2 Turn off the unit.3 Hold down the LEARN key on the unit’s remote control for more than3 seconds to set the unit to the learning mode.When the unit is in the learning mode, the indicators on the front panel flash asshown below.NOTE• Steps 4 to 7 require only the TV’s remote control and the keys on the front panel of the unit. Theremote control of the unit is not necessary.• If the unit has already learned functions, the following indicators light up.Mute: BD/DVD, Volume (-): COAXIAL, Volume (+): ANALOG, Power: BLUETOOTH4 Teach the unit the “Mute” code of the TV’s remote control.4-1 Press MUTE on the front panel of the unit.4-2 While pointing your TV’s remote control at the remote control sensor, holddown the mute key for more than 1 second twice or three times.5 Teach the unit the “Volume (–)” code of the TV’s remote control.5-1 Press VOLUME (–) on the front panel of the unit.5-2 While pointing your TV’s remote control at the remote control sensor, holddown the volume (–) key for more than 1 second twice or three times.Programming the unit with the TV’s remote control(TV’s remote control learning function)• This function is available only when your TV’s remote control uses IR (infrared) signal.• An RF (Radio Frequency) remote control will not work.• If you want to use a cable or satellite set top box’s remote control to operate the unit, use your originalTV’s IR (infrared) remote control to program the unit, then use the set top box’s remote control tooperate.• If by changing the volume of the unit the TV’s volume also changes, set the TV’s volume to minimum, ordisable speaker output.Result Bleep/buzzer IndicatorsSuccessfullylearned OnceFailed to learn* Repeat fromStep 4-1.TwiceResult Bleep/buzzer IndicatorsSuccessfullylearned OnceFailed to learn* Repeat fromStep 5-1.TwiceApprox. 30 cm (1 ft)TV’s remote controlHold down(more than 1 second)Release(more than 1 second)Hold down(more than 1 second)Release(...)Lights upFlashLights upFlash