Yamaha SRT-1000 Owner's Manual

Also see for SRT-1000: Owner's manual Owner's manual Owner's manual

15En6 Teach the unit the “Volume (+)” code of the TV’s remote control.6-1 Press VOLUME (+) on the front panel of the unit.6-2 While pointing your TV’s remote control at the remote control sensor, holddown the volume (+) key for more than 1 second twice or three times.7 Teach the unit the “Power” code of the TV’s remote control.7-1 Press (power) on the front panel of the unit.7-2 While pointing your TV’s remote control at the remote control sensor, holddown the power key for more than 1 second twice or three times.8 To finish the learning mode, press the LEARN key on the unit’sremote control.This completes the necessary settings. Now you can operate the unit with the TV’sremote control’s mute key, volume keys, or power key.HINT• The learning mode will be finished automatically if no operations are performed for 5 minutes.• Set the TV volume to minimum. When you turn up the volume of the unit with the TV’s remotecontrol, the volume of the TV may be turned up at the same time. In this case, follow Step 4 in“Connections” (p.5) to change the TV setting.• You can press the (power) key on the unit’s remote control to finish learning mode.Clearing all learned operations1 With the unit turned off, hold down the LEARN key on the suppliedremote control for more than 3 seconds (for entering the learningmode).When the unit is in the learning mode, the indicators on the front panel flash asshown below.2 Hold down INPUT on the front panel of the unit for more than 3seconds.If the clearing is completed, you will hear the bleep sound three times.3 Press the LEARN key on the supplied remote control.Result Bleep/buzzer IndicatorsSuccessfullylearned OnceFailed to learn* Repeat fromStep 6-1.TwiceResult Bleep/buzzer IndicatorsSuccessfullylearned OnceFailed to learn* Repeat fromStep 7-1.TwiceLights upFlashLights upFlashFlashes in red (cleared)