E2-17301021301022403033EMU00157TILT SUPPORT LEVERTo keep the outboard motor in the tilted-up position, lock the tilt support lever tothe clamp bracket.EMU00163TOP COWLING LOCK LEVERSTo remove the engine top cowling, pullup the front and rear lock levers. Then liftoff the cowling. When replacing the cowl-ing, check to be sure it fits properly in therubber seal. Then lock the cowling againby moving the levers downward.q000825EMU01146FLUSHING DEVICEThis device 1 is used to clean the coolingwater passages of the motor using a gar-den hose and tap water.NOTE:Refer to “Cleaning Cooling-waterPassages” in Chapter 4 for instructions onusage.
