E3-19ADJUSTING TRIM ANGLEEMU01401Power Trim/Tilt Modelw8 Be sure all people are clear of the out-board motor when adjusting thetrim/tilt angle, also be careful not topinch any body parts between the driveunit and clamp bracket.8 Use caution when trying a trim positionfor the first time. Increase speed gradu-ally and watch for any signs of instabili-ty or control problems.8 Use the power trim/tilt switch locatedon the bottom engine cowling (ifequipped) only when the boat is at acomplete stop with the engine off.The outboard motor trim angle can beadjusted operating the power trim/tiltswitch 1.To raise the bow (“trim-out”), push theswitch UP.To lower the bow (“trim-in”), push theswitch DN.Make test runs with the trim set to differ-ent angles to find the position that worksbest for your boat and operating condi-tions.NOTE:To adjust the trim angle while the boat ismoving, use the power trim and tiltswitch located on the remote controldevice or tiller handle, if so equipped.UPDN701034UPDNq
