Yamaha XT250P Owner's Manual

Also see for XT250: Owner's manual Service manual

Periodic maintenance and adjustment7-39123456789101112TIPThe drive chain does not need to bedisassembled in order to remove andinstall the wheel.5. Remove the axle nut, washer anddrive chain adjusting plate from theleft side.6. While supporting the brake caliper,pull the wheel axle out togetherwith the drive chain adjusting plateand washer from the right side.7. Remove the spacers and wheel bypulling the wheel to the back.NOTICE: Do not apply the brakeafter the wheel and brake dischave been removed, otherwisethe brake pads will be forcedshut.[ECA11073]To install the rear wheel1. Install the spacers into both sidesof the wheel hub.2. Install the right side washer anddrive chain adjusting plate onto thewheel axle, and then install thewheel and brake caliper bracket byinserting the wheel axle from theright side.TIP Make sure that the drive chain ad-justing plates are installed with thepunched sides facing to the out-side and that the retainer on theswingarm is inserted into the slot inthe brake caliper bracket. Make sure that there is enoughspace between the brake pads be-fore installing the wheel.3. Install the drive chain onto the rearsprocket.4. Install the left side drive chain ad-justing plate, washer and axle nut.1. Axle nut2. Drive chain adjusting plate21(a)1. Drive chain adjusting plate2. Wheel axle3. Brake caliper1 321. Retainer1