9-19EBU25860CLEANING AND STORAGEEBU25902CleaningFrequent, thorough cleaning of your ATV will notonly enhance its appearance but will improve itsgeneral performance and extend the useful life ofmany components.1. Before cleaning the ATV:a. Block off the end of the exhaust pipe toprevent water entry. A plastic bag andstrong rubber band may be used.b. Make sure the spark plug and all filler capsare properly installed.2. If the engine case is excessively greasy, applydegreaser with a paint brush. Do not apply de-greaser to the chain, sprockets or wheel ax-les.3. Rinse the dirt and degreaser off with a gardenhose. Use only enough pressure to do the job.WARNING! Wet brakes may have reducedstopping ability, increasing the chance ofan accident. Test the brakes after washing.Apply the brakes several times at slowspeeds to let friction dry out the linings.[EWB02311] NOTICE: Excessive water pressuremay cause water seepage and deteriora-tion of wheel bearings, brakes, transmis-sion seals and electrical devices. Manyexpensive repair bills have resulted fromimproper high-pressure detergent applica-tions such as those available in coin-oper-ated car washers. [ECB00711]4. Once most of the dirt has been hosed off,wash all surfaces with warm water and mild,detergent-type soap. An old toothbrush or bot-tle brush is handy for hard-to-reach places.5. Rinse the ATV off immediately with clean wa-ter and dry all surfaces with a chamois, cleantowel or soft absorbing cloth.6. Dry the chain and lubricate it to prevent it fromrusting.7. Clean the seat with a vinyl upholstery cleanerto keep the cover pliable and glossy.8. Automotive type wax may be applied to allpainted and chrome plated surfaces. Avoidcombination cleaner-waxes. Many containabrasives which may mar the paint or protec-tive finish. When finished cleaning, start theengine and let it idle for several minutes.